CineLog20 by GEPRC

Overview

The CineLog20 series by GEPRC is designed for shooting in complex indoor environments. It features a lightweight pusher design and a redesigned camera gimbal vibration reduction solution, providing excellent anti-shake performance. Available in three versions—Link Wasp, O3 Air Unit, and Analog—this drone is optimized for various video transmission systems.

Key Features

• Design: Lightweight pusher design with improved vibration dampening structure.
• Video Quality:
  • O3 Air Unit: Shoots 4K 120fps video without an external camera.
  • Link Wasp and Analog: Compatible with high-quality cameras for FPV shooting.
• Motors and ESC: Equipped with GEPRC SPEEDX2 1303.5 5500KV motor and Taker G4 35A AIO.
• Propellers: Uses Emax 4-blade propellers for quiet operation and efficient power.
• Mounting: One-piece injection-molded camera mount compatible with various action cameras, including GEPRC naked GP 8/9/10/11, Action2, insta360 Go2, and Peanut.

Changelog

• Apr 19, 2024: FC system changed from GEP-F411-35A AIO to TAKER G4 35A AIO.
• Feb 20, 2024: (Analog version) VTX changed from GEPRC 5.8G@600mw to RAD Mini 1W VTX.

Specifications

• Model: CineLog20 (HD O3, HD Wasp, Analog)
• Frame: GEP-CL20
• Wheelbase: 100mm
• Plates:
  • Gimbal: 2.0mm
  • Top: 2.5mm
  • Bottom: 1.5mm
• FC System: Taker G4 35A AIO
• MCU: STM32F411CEU6
• Gyro: ICM 42688-P
• OSD: Betaflight OSD w/AT7456E chip
• ESC: 8Bit 35A
• VTX:
  • HD O3: O3 AIR Unit
  • HD Wasp: Link
  • Analog: RAD Mini 1W VTX
• Camera:
  • HD O3: O3 Camera
  • HD Wasp: Runcam Wasp
  • Analog: Caddx Ratel2
• Antenna:
  • HD O3: 5.8G & 2.4G
  • HD Wasp: GEPRC Peano 5.8G LHCP UFL
  • Analog: GEPRC Peano 5.8G RHCP MMCX
• Motor: GR1303.5 5500KV
• Propeller: EMAX Avan Micro 2×2.4×4
• Weight:
  • HD O3: 140g (with TBSNanoRX)
  • HD Wasp: 133.6g (with TBSNanoRX)
  • Analog: 116g (with TBSNanoRX)
• Receiver Options:
  • PNP (built-in DJI receiver for HD O3)
  • ELRS2.4G
  • TBS Nano RX
  • RXSR
• Recommended Battery: LiHv 4S 450mAh-660mAh
• Flight Time: 4-6 minutes

Includes

• 1 x CineLog20 (HD O3, HD Wasp, Analog)
• 2 x 2-inch propellers (pairs)
• 1 x Naked GP Camera Base
• 2 x M15*150mm battery straps
• 2 x Battery Silicone Pads
• 2 x EVA landing Pads
• 1 x Set of screws
• 1 x L-shaped screwdriver (1.5mm)
• 1 x Antenna fixed tube
• 1 x 4S Naked GP Camera power cable (with balanced terminal head)
• 2 x EVA damping rings of guards
• 1 x TBS Antenna mount (Vertical Type)
• 1 x TBS Antenna mount (Horizontal Type)
• 1 x TBS Antenna printed parts

Screw Package

• 3 x M2*12mm cup head screws
• 2 x M2*5mm round head screws
• 1 x M2*8mm round head screw with pad
• 3 x M2*7mm round head screws
• 2 x M2*8mm round head screws
• 2 x M2 iron nuts
• 1 x self-clinching nut