Darwin 240 Johnny 5 Quadcopters
DarwinFPV
Freestyle
| Name | Value |
|---|---|
| Weight | 350 |
| Price | 199 |
| Frame | DarwinFPV Johnny 5 Frame |
| Propellers | Gemfan Flash 51466 |
| Motors | DarwinFPV 2207-2400KV Brushless Motor |
| Recommended Battery | 3-6S |
| Flight Controller | 4 IN 1 50A BLHeli_S ESC |
| Receiver | PNP, ELRS 2.4G |
Description
DarwinFPV Johnny 5
DarwinFPV- Johnny 5 is a high-performance FPV drone designed for enthusiasts and advanced users. This drone kit comes without a battery, charger, receiver, or remote control, allowing for customization to suit individual needs.
Specifications
Frame
- Wheel Base: 240mm
- Frame Arm Thickness: 5.5mm
- Frame Kit Material: 3K Carbon Fiber
Motors
- Model: DarwinFPV 2207-2400KV Brushless Motor
- Motor KV: 2400KV
- Idle Current (Io/10V): 0.81A
- Lipo Cell: 3-4S
- Weight: 36.4g
- Max Continuous Current: 32A
- Max Continuous Power: 765W
- Configuration: 12N/14P
- Prop Adapter Shaft: M5
- Bolt Holes Spacing: 16mm
- Bolt Thread: M3
ESC (Electronic Speed Controller)
- Model: 4 IN 1 50A BLHeli_S ESC
- Continuous Current: 50A
- Peak Current: 60A (10S)
- Lithium Battery Section Number: 2-6S
- BEC: 5V 2A
- ESC Weight: 10.8g
- Firmware: BL_S
- Maximum Support Throttle Signal: DSHOT600
- Mounting Hole: M3 30.5 * 30.5mm
Flight Controller
- Model: F4 Flight Controller
- Lithium Battery Section Number: 3-6S
- BEC: 10V 1A, 4.5V, 3.3V
- MCU: STM32F405
- Gyro: MPU6000
- OSD: AT7456E
- Firmware: MATEKF405STD
- Weight: 7.2g
- Mounting Hole: M3 30.5 * 30.5mm
- Bluetooth: Yes
VTX (Video Transmitter)
- Model: 5.8G 40CH 800mw VTX TX805P
- Frequency: 5.8G
- Channels: 40CH
- Input Voltage: 7V~24V
- 5V Camera Supply:
- 120mA (MAX) ---- 25mW @ 12V
- 200mA (MAX) ---- 200mW @ 12V
- 300mA (MAX) ---- 600mW @ 12V
- 350mA (MAX) ---- 800mW @ 12V
- Power Supply: 5V Output for Camera
- Output Power: 25mW/200mW/600mW/800mW switchable
- Antenna Connector: MMCX
- Cable Connector: Solder Pads
- Weight: 8g (excluding antenna)
