Baby Ape Pro V2

Baby Ape Pro V2

Darwin Baby Ape has been loved by many pilots as soon as it was published. In order to design a better FPV drone, we have upgraded the Baby Ape based on the pilots' feedback and launched the BabyApe Pro V2.

Upgrades

1. Standoffs: Upgraded from nylon to aluminum alloy, strengthening the frame and stabilizing the structure.
2. Receiver Fixing Bracket: Added for improved stability.
3. Arms: Upgraded from 4 individual arms (2.5mm thickness) to 2 integrated arms (3.0mm thickness). Easier to disassemble, sturdier, and more durable.
4. Screws: Only 4 screws needed to fix, and the arm can be replaced by removing 2 screws without removing the whole drone.

Specifications

CADDX ANT Camera

• Resolution: 1200TVL
• Image Sensor: 1/3" CMOS Sensor
• Input: DC 3.7-18V
• TV System: PAL/NTSC

1104 4300KV 2-3S Brushless Motor

• KV: 4300KV
• Lipo cell: 2-3S

AIO 4 IN 1 15A BLHeli_S ESC

• Input voltage: 1-3S LiPo
• Continuous current: 15A
• Peak current: 17A (10S)
• BEC output: No
• Main control chip: EFM8BB21
• Firmware upgrade: Supports Dshot600/Oneshot125
• MOS: 3*3

F411 AIO Flight Controller

• Main control chip: STM32F411
• Integrated OSD
• PPM/DSM/IBUS/UART share: UART1-RX
• IMU: MPU6500 (SPI)
• Mounting holes distance: 25.5*25.5mm
• Supports Betaflight firmware

5.8G 40CH 0mW/25mW/200mW switchable VTX

• Supports TBS SmartAudio
• Transmitting power: 0mW/25mW/100mW/200mW switchable
• Channel: 40CH
• Full video format: NTSC/PAL
• Input voltage: 7V~24V
• Power dissipation: +12V/600MW
• Size: 25×20×6mm
• Weight: ≤3.2g (except antenna)
• With copper pipe mini antenna (ipex antenna)

3016 3-blade propeller

• Mounting hole: 1.5mm
• Center thickness: 5.5mm
• Quantity: 2 pairs
• Weight: 1.18g a pair

Package Options

Baby Ape Pro V2 PNP

• 1 * Baby Ape Pro V2 Drone
• 2 * 3016 Propellers (pair)
• 1 * Set of Screws

Baby Ape Pro V2 BNF (ELRS Receiver)

• 1 * Baby Ape Pro V2 Drone
• 2 * 3016 Propellers (pair)
• 1 * Set of Screws
• 1 * ELRS Receiver

Baby Ape Pro V2 BNF (R81 Receiver)

• 1 * Baby Ape Pro V2 Drone
• 2 * 3016 Propellers (pair)
• 1 * Set of Screws
• 1 * R81 Receiver

Baby Ape Pro V2 RTF (ELRS Receiver)

• 1 * Baby Ape Pro V2 Drone
• 2 * 3016 Propellers (pair)
• 1 * Set of Screws
• 1 * ELRS Receiver
• 1 * TX12 Mark II ELRS Radio Controller
• 1 * Charger
• 1 * Goggles
• 2 * Batteries

Baby Ape Pro V2 RTF (ELRS Receiver)

• 1 * Baby Ape Pro V2 Drone
• 2 * 3016 Propellers (pair)
• 1 * Set of Screws
• 1 * ELRS Receiver
• 1 * Zorro ELRS Transmitter
• 1 * Charger
• 1 * Goggles
• 2 * Batteries